Easiest way. Forget the rope. Run a light chain from drawbar to pin in top link connector on tractor. Drive a round punch into the last link of chain to expand it to be more circular to fit the pin in the top link. Attach chain to middle of drawbar with a shackle or a quick link.
Sorta embarrassed to ask ... I should really know.
- Thread starter SARG
- Start date
- Views: 6205
WranglerX
Super Member
OP
SARG
Platinum Member
- Joined
- Aug 29, 2009
- Messages
- 845
- Location
- Upstate New York
- Tractor
- NH T1030- NH T1530 - 49G Brockway
Been a few months but I finally remembered to get a photo of the solution I ended with.
jyoutz
Super Star Member
I had a small JD tractor with a MMM with the same issue. The dealer sold me a kit to lock the hitch arms in place. I bet that NH has something similar.
oldnslo
Super Member
If like my 2400H Branson yes it would. If you restrict the arms from lowering the mid mount deck will not lower. Normally you don’t need to lower 3 point fully to mow so arms are not dragging on the ground.
