skid steer mounts

[DMF]

If you search the forums you can find the SAE Spec sheets for the Skid Steer QA's

I have tried to find these but haven't any luck. If you (or anyone else) has the direct link I'd appreciate it if you could post it here.

Thanks!

 

[PBinWA]

I seem to remember that the thickness of the top bar was dependent upon the expected load. For a smaller tractor 3/8" was fine but a big skidsteer would probably use 1/2". I bought my blanks a year or so ago and I seem to remember something like that on the information page.

 

[Spudland_Dave]

I have tried to find these but haven't any luck. If you (or anyone else) has the direct link I'd appreciate it if you could post it here.

Thanks!

2nd Post:
http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html

 

[DMF]

Excellent Dave; thanks! I was thinking of sending you a PM as I figured you do a lot more fabricating than me!

 

[Spudland_Dave]

Excellent Dave; thanks! I was thinking of sending you a PM as I figured you do a lot more fabricating than me!

No problem at all...if you need any tips or help, feel free to PM me...

 

[6sunset6]

This might be helpful