Front-End Loader skid steer cement mixer on a tractor
- Thread starter simmll1
- Start date
- Views: 5283
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,787
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Wet cement is awfully heavy.
Calculate the weight of cement mixer and cement mixer load combined relative to lift capacity of your FEL.
Does your FEL have an SSQA connection?
TPH cement mixer, 8-cubic feet + 12-cubic feet:
VENDER: https://www.everythingattachments.com/Cosmo-80-350-Tractor-PTO-Cement-Mixer-p/csmo-bm80-350-cm.htm
Calculate the weight of cement mixer and cement mixer load combined relative to lift capacity of your FEL.
Does your FEL have an SSQA connection?
TPH cement mixer, 8-cubic feet + 12-cubic feet:
VENDER: https://www.everythingattachments.com/Cosmo-80-350-Tractor-PTO-Cement-Mixer-p/csmo-bm80-350-cm.htm
Last edited:
Smokeydog
Elite Member
I used two different 3pt pto cement mixers and self mixed many yards. Great for short yards and places a cement truck couldn’t go.
Then bought a multi quip trailer type gas driven mixer. Liked loader able to help lift Portland, sand, gravel and then transport and place the mix. It has forklift loops for moving while empty. Two DIY modifications I’ve wanted to pursue. 1) Funnel bucket or funnel/chute to charge ingredients to the mixer with the tractor FEL. This would include a 3pt mixer. 2) stronger forklift pockets to transport a loaded stand alone mixer.
Then bought a multi quip trailer type gas driven mixer. Liked loader able to help lift Portland, sand, gravel and then transport and place the mix. It has forklift loops for moving while empty. Two DIY modifications I’ve wanted to pursue. 1) Funnel bucket or funnel/chute to charge ingredients to the mixer with the tractor FEL. This would include a 3pt mixer. 2) stronger forklift pockets to transport a loaded stand alone mixer.