Size / type of quick connects

[LS Tractor Owner]

Does anyone know the type of factory quick connects on our LS tractors? Are they the standard AG type connectors or the poppet type? The reason I ask is I am going to fab / piece together a T&T kit. I have the factory remotes already installed, but will need the male ends for the hoses going to the cylinders. Any info would be appreciated. I would call the dealer, but the only guy I really trust is off on vacation. Plus, he would ask why I was not buying the stuff from them.... (because they are almost 4x the cost).

 

[kennyd]

99% sure they are 1/2" ISO 5675 "AG" style w/poppet, thats pretty much the standard these days for rear remotes.

 

[LS Tractor Owner]

Thanks, I will probably just pick up a couple and see if they fit.

 

[kennyd]

:thumbsup:

They will look like this:

 

[LS Tractor Owner]

Cool, thanks. I will look at the BH ends later.

 

[sneyeper]

Thanks ... I have been wondering the same thing as I want to make extensions for mine.

 

[PCABE5]

Your female end should be a poppet but either ball or poppet male tips will work. If you have a farm store that carries Pioneer couplers, look for the Pioneer 8010-4 or 8010-4P. The ISO 5675 is based off the Pioneer.

 

[LS Tractor Owner]

Thanks, I still didn’t get a chance to get some to try.