J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
You don't need to do that using a DA valve.
One side of lever movement allows fluid into the cyl as a pressure port, and lever the other way, lets the fluid out the same port if there is sufficient weight to accomplish this.
You can even plug the A work port and only use the B work port for SA cyl work.
One side of lever movement allows fluid into the cyl as a pressure port, and lever the other way, lets the fluid out the same port if there is sufficient weight to accomplish this.
You can even plug the A work port and only use the B work port for SA cyl work.