chazdo2
Bronze Member
Every time I release the brake / clutch it quits. I have the seat switch jumped and the two switches the brake/clutch arm stroke work fine. I dont know what else to do?
yes pulled them out cleaned all the crud around them they work fine and the clutch/brake arm pushes them down all the way. I checked them with my voltmeter for continutity 0 ohms closed infinity when open for both.Have you used a volt meter to verify the safety switches on the clutch brake are working?
FIXED IT!!!! Found a wiring diagram and the seat switch is normally closed! So jumping the switch made it quit! Thanks for responces!!!!Have you tried looking for service manual on simplicity website?
Depending on age of the mower what other safety switches does it have that kill the ignition circuit. If mechanical engaged mower deck there could be a switch on the deck engagement mechanism.