DLTTrekkers
Veteran Member
Iwould like to know y ?
Silinderrods bending ?
- Thread starter DLTTrekkers
- Start date
- Views: 838
JerryK
Elite Member
- Joined
- Feb 21, 2004
- Messages
- 3,261
- Location
- Vanderbilt, Michigan, USeh?
- Tractor
- Mahindra (2011)5035 HST TLB & (2016)2555 HST Cab & (2017)1526 HST(2018)Cub Cadet Pro Z 154L (1991) Caterpillar E70B
If your FEL cyl's are bending, it is because someone is backdragging with the bucket with the cyl's extended. You can also bend your cyl rods by having too much hyd pressure. But you have to give us more into..... sorry....
OP
DLTTrekkers
Veteran Member
My theory is......silindermountingpoint .....piston.......gland........rodmountingpoint...........If all 4 is evenspread from each other is will be strong ...........If silinder is overextended(piston and gland together then at its weakest and any missalignment with the welding on of the ends of the silinder will help with the bending .
JerryK
Elite Member
- Joined
- Feb 21, 2004
- Messages
- 3,261
- Location
- Vanderbilt, Michigan, USeh?
- Tractor
- Mahindra (2011)5035 HST TLB & (2016)2555 HST Cab & (2017)1526 HST(2018)Cub Cadet Pro Z 154L (1991) Caterpillar E70B
Could be. Hard to trouble shoot long distance with no pictures or much info.... Sorry..... 
