Sea Foam
- Thread starter murph1
- Start date
- Views: 8871
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Hey Murph, how's Potato's? I have nothing but luck with it so far. Great carb in a can.
coobie
Super Member
- Joined
- Sep 19, 2004
- Messages
- 6,302
- Location
- S.Michigan
- Tractor
- Kubota RTV 1100c, JD 740,Kioti DK 40 with KL401 loader .
Good stuff.
kf4uda
Veteran Member
- Joined
- Apr 27, 2009
- Messages
- 1,546
- Location
- Middle TN
- Tractor
- NH TD5030, 861 Ford Powermaster, CaseIH Farmall 35A, 555A Ford Backhoe, S150x SnapperPro ZTR, Polaris Ranger XP800
It has worked good for me several times over the years. Seafoam has been around for a long time. http://seafoamsales.com/
As a general rule I hate stuff like this. However, two years ago as a last resort before rebuilding/replacing the carburetor on an inboard ski boat I dumped a can in the gas tank figuring I didn't have anything to lose. The stumbling off idle when accelerating was gone almost immediately and I was left shocked and reevaluating my general rules. I think a can is $6-$9 so if you have a situation like this it's worth a try.
I've heard of some people using it in the crankcase as an oil additive that they believe cleans something. I'll never believe that's okay.
The original Seafoam product can be used different ways - in oil, gas, intake cleaner....
I use it in gas, as a occasional cleaner. Works well, up to a point - if you have a carb that is totally clogged up with dried junk, often nothing except complete disassembly and manual cleaning/replacement of parts will work. But, for carbs that have been somewhat neglected, it can often help quite a bit.
Recently I've heard that some people have created problems by using way too high of a dosage in gas - affecting seals. I have not experienced this, nor been able to verify otherwise, but if it is true, then I view it as a positive thing - means to me that the product is strong enough to be useful. Just follow the dosage ratios correctly, and you shouldn't have an issue.
Rgds, D.
I use it in gas, as a occasional cleaner. Works well, up to a point - if you have a carb that is totally clogged up with dried junk, often nothing except complete disassembly and manual cleaning/replacement of parts will work. But, for carbs that have been somewhat neglected, it can often help quite a bit.
Recently I've heard that some people have created problems by using way too high of a dosage in gas - affecting seals. I have not experienced this, nor been able to verify otherwise, but if it is true, then I view it as a positive thing - means to me that the product is strong enough to be useful. Just follow the dosage ratios correctly, and you shouldn't have an issue.
Rgds, D.
Wolfy
Veteran Member
Seafoam really does work. I add it to high octane gasoline, and it will last much longer. Also have fixed many carb problems in old garden tractors.
Monster5601
Platinum Member
Oh no, here we go again....
Here is the last 30 some page thread on Seafoam.
http://www.tractorbynet.com/forums/oil-fuel-lubricants/155969-seafoam.html
Here is the last 30 some page thread on Seafoam.
http://www.tractorbynet.com/forums/oil-fuel-lubricants/155969-seafoam.html
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Saved me from taking the carburetor apart several times on different engines.
Ralph
Ralph
