Damage Inc
New member
I have a Scag with the Hydro Gear zt 3400 trans axles. I'm looking for some transaxle fluid recommendations that don't cost $70+ a gallon...? Hydor gear service support shows:
Typically, an engine oil with a minimum rating of 9.0 cSt (55 SUS) at 230° F (110° C) and an API classification of SL is recommended. A 20W50 engine oil has been selected for use by the factory and is recommended for normal operating procedures.
Considering Scag fluid is 70+ but a good conventional 20w50 is 25-35 and synth is right about 60.
Typically, an engine oil with a minimum rating of 9.0 cSt (55 SUS) at 230° F (110° C) and an API classification of SL is recommended. A 20W50 engine oil has been selected for use by the factory and is recommended for normal operating procedures.
Considering Scag fluid is 70+ but a good conventional 20w50 is 25-35 and synth is right about 60.