Saved King Kutter from scrapyard

   / Saved King Kutter from scrapyard #1  

cup149

Silver Member
Joined
Feb 25, 2001
Messages
126
Location
Slate Lick, Armstrong Co, PA
Tractor
International 300 Utility, BX2200
Got this rotary cutter with a tractor purchase. Was going to scrap it last year when scrap prices were through the roof, besides, I wanted a three point type cutter, not a pull behind. Bottom fell out of the scrap market and I took a good look at what I had to work with. Some cut off wheels, welding rod, paint and scrap metal from work, just might turn this pile of junk into a working three point unit. After many hours anoying my neighbors with pounding, cutting and grinding, it didn't come out too bad...and it works.
 

Attachments

  • sP1000508.JPG
    sP1000508.JPG
    80.8 KB · Views: 517
  • sP1000752 (5).JPG
    sP1000752 (5).JPG
    59.6 KB · Views: 479
  • sP1000755.JPG
    sP1000755.JPG
    83.9 KB · Views: 481
   / Saved King Kutter from scrapyard #2  
looks good we all have projects like these by the time we are done we wonder why we did it. but then we remember it was fun. i like the tractor nice international, what vintage is it.
 
   / Saved King Kutter from scrapyard
  • Thread Starter
#3  
It's a 1955 300 Utility. About 40 engine HP, independant PTO and live hydraulics.
 
   / Saved King Kutter from scrapyard #4  
Great job, almost looks brand new!
 
   / Saved King Kutter from scrapyard #5  
Nice job on the restoration!
 
   / Saved King Kutter from scrapyard #6  
Sometimes yah gotta do what yah gotta do. It looks stronger than the original and will probably last longer. Good job. My best friends are the wire feed, torch, and bandsaw.
 
   / Saved King Kutter from scrapyard #7  
Got this rotary cutter with a tractor purchase. Was going to scrap it last year when scrap prices were through the roof, besides, I wanted a three point type cutter, not a pull behind. Bottom fell out of the scrap market and I took a good look at what I had to work with. Some cut off wheels, welding rod, paint and scrap metal from work, just might turn this pile of junk into a working three point unit. After many hours anoying my neighbors with pounding, cutting and grinding, it didn't come out too bad...and it works.

Yep.. I'm sure my neighbors cringe every time they see something ride home on my trailer.

soundguy
 
   / Saved King Kutter from scrapyard #9  
what's bad about it?


soundguy
 
   / Saved King Kutter from scrapyard #10  
It's subjective, I guess. Why not something that matches the tractor? Or, something cheerful, and bright? Or, something racy? So many options besides "babysh*t yellow"!
 

Tractor & Equipment Auctions

2025 K4525 UNUSED Double Garage Steel Barn (A53117)
2025 K4525 UNUSED...
2020 Terex RL4 Towable Light Tower (A51691)
2020 Terex RL4...
2025 K0608G UNUSED 3-Rail Style Fence (A53117)
2025 K0608G UNUSED...
2018 JLG 3246ES 32ft Electric Scissor Lift (A50322)
2018 JLG 3246ES...
2016 Ford F550 4x4 Bucket Truck with Altec AT41 - 46FT Rotating Bucket and Jib Winch (A53473)
2016 Ford F550 4x4...
2013 MACK GRANITE (A52472)
2013 MACK GRANITE...
 
Top