satoh beaver front end loader

[firebirdfan78]

I want to put a front end loader on my beaver there are no external hydraulic ports. I need to know where to go about finding what type of selector valve or manifold i need any held would be great

 

[J_J]

Do you have hyd 3pt, or any hydraulics?

If you have an S370, you have about 3.84 GPM, at 1920 psi

http://www.tractordata.com/farm-tractors/003/1/8/3180-satoh-s370.html

 

[firebirdfan78]

I do have 3 pt hyd.

 

[J_J]

Can you see a hyd pump driven by the engine or hyd lines going from front to the back?

 

[firebirdfan78]

Trere is a pump on the motor with lines going to my rear pto

 

[J_J]

Then all you have to do is to tap into the pressure line, install a loader valve and you will be set.

 

[firebirdfan78]

When i tap into the high side do i need a valve to sto flow to the rear pto so i dont lose power to the front? As you can probably tell im pretty clueless when it come to hydraulics. I appreciate all the help

 

[J_J]

Yes, the FEL valve will be in series with the pump and the 3pt.

I would recommend a loader valve like this.

https://www.surpluscenter.com/item.asp?item=9-7401&catname=hydraulic

https://www.surpluscenter.com/Instruct/I9-7401.pdf

 

[firebirdfan78]

Ok thank you very much

 

[runningbird]

If he uses that loader valve would he be able to add rear remotes later down the line?

 

[J_J]

That valve has PB, and you can add valves as necessary.