RTV 1100c hydraulic capacity (volume) for the dump circuit

[pdsrms]

Does anyone know what the hydraulic capacity (ie volume of reservoir) for the dump circuit on above RTV?
This would be different than than total capacity of hydraulic fluid listed in the manual as there are two reservoirs. One for the engine and one for the dump piston. While I'm at it, anyone know the GPM of the pump that controls the dump circuit?
Thank You

 

[01hunter570]

I just drained the hydraulic tank on my Kubota 1100 It takes between 2 to 3 gallons to fill the tank. I would start with 2 1/2 check the dip stick and then add a pint or quart to a time until the correct level shows on the dip stick . at least that's how I went about it. hope this helps, good luck 01hunter570