Rotella 5/40 synthetic

   / Rotella 5/40 synthetic #1  

BBELL

Bronze Member
Joined
Aug 20, 2003
Messages
79
Location
Maine
Tractor
Kubota L-4310 GST/ 1979 Ford 1700
I just put Rotella 5/40 weight, that's the only weight I could get. Is it ok, or is the 5 weight to low?
 
   / Rotella 5/40 synthetic #2  
I'm running it in both of my diesels. Great cold weather starting. At running temps it's a 40 weight. You're fine.
 
   / Rotella 5/40 synthetic #3  
Based on the pour point (-40 C). unless it get close to -20, you would be fine. It depends on how far into Maine you are. Might be good, might not be. If you use a block heater you are fine.

I know in my part of Taxachusetts we see up to -10 below & colder in some parts. For me Rotella (a dino oil), would not work to well since you are getting close to the boarder line pumping temp.

I have block heater but never use it since I never remember. For me, you should not need one unless you livewhere the temps are so low...you get the point.
 

Tractor & Equipment Auctions

2025 Kivel 48in Forks and Frame Skid Steer Attachment (A53421)
2025 Kivel 48in...
2008 DOOSAN G25 GENERATOR (A53843)
2008 DOOSAN G25...
2004 MACK GRANITE CV713 DUMP TRUCK (A51406)
2004 MACK GRANITE...
2015 RAM 5500 Bucket Truck w/ Versalift SST40 boom -Cummins Diesel - Auto Trans- 4X4 - 72096 miles (A55218)
2015 RAM 5500...
2016 FREIGHTLINER  CASCADIA (INOPERABLE) (A53843)
2016 FREIGHTLINER...
TORO TRX-20 WALK BEHIND TRENCHER (A51406)
TORO TRX-20 WALK...
 
Top