Rod hanging - supposed to be attached to the pedals

   / Rod hanging - supposed to be attached to the pedals #1  

Jschaad

New member
Joined
Jan 7, 2024
Messages
2
Tractor
Back
Just bought a 200 hr rk24 and there is a rod underneath just hanging. Everything seems to run fine so I’m not sure if it was disconnected on purpose or important?
 

Attachments

  • IMG_1860.jpeg
    IMG_1860.jpeg
    1.5 MB · Views: 124
   / Rod hanging - supposed to be attached to the pedals #2  
Looks like it's the cable for the throttle. Also called link pedal, where once you press the Forward or Reverse pedal, it will rev up the engine. Like on a vehicle.

If you set the RPMs using the hand throttle, this becomes more or less irrelevant, depending on the RPMs.
 
   / Rod hanging - supposed to be attached to the pedals
  • Thread Starter
#3  
Looks like it's the cable for the throttle. Also called link pedal, where once you press the Forward or Reverse pedal, it will rev up the engine. Like on a vehicle.

If you set the RPMs using the hand throttle, this becomes more or less irrelevant, depending on the RPMs.
Thanks!
 

Tractor & Equipment Auctions

LIKE NEW 2023 Rhino 84in Reverse Rotation Rotary Tiller (A52748)
LIKE NEW 2023...
ATLAS 84" BOX BLADE (A51243)
ATLAS 84" BOX...
2006 GMC C8500 Altec AM547 50ft Material Handling Insulated Bucket Truck (A50323)
2006 GMC C8500...
2018 JLG 1932R 19ft Electric Scissor Lift (A50322)
2018 JLG 1932R...
2012 Bobcat S850 (A50120)
2012 Bobcat S850...
SpotWeld RockerRite 480V Arm Type Spot Welder (A50322)
SpotWeld...
 
Top