Silver_Knight
Silver Member
Just curious as to what everyone is paying for roads in your area. I have gotten a few quotes for 2700' road 12' wide, scraping and 4" state spec base watered and rolled for 0.75 to 1.00 a sq ft.
Roads
- Thread starter Silver_Knight
- Start date
- Views: 3031
OP
Silver_Knight
Silver Member
Just curious as to what everyone is paying for roads in your area. I have gotten a few quotes for 2700' road 12' wide, scraping and 4" state spec base watered and rolled for 0.75 to 1.00 a sq ft.
OP
Silver_Knight
Silver Member
OK, 100 views we should be getting a reply soon /forums/images/graemlins/laugh.gif
OP
Silver_Knight
Silver Member
OK, 100 views we should be getting a reply soon /forums/images/graemlins/laugh.gif
RickS
Silver Member
I have not priced road work yet, but I soon will. I'm seriously considering letting the house builder take care of it. That way the man who builds the house pad can do the road at the same time with the same equipment. More efficient that way.
RickS
Silver Member
I have not priced road work yet, but I soon will. I'm seriously considering letting the house builder take care of it. That way the man who builds the house pad can do the road at the same time with the same equipment. More efficient that way.
wushaw
Elite Member
Isn't your base already calche or you may have a patch or two of black dirt.
If it's calche then you already have your base for free.
If it's calche then you already have your base for free.
wushaw
Elite Member
Isn't your base already calche or you may have a patch or two of black dirt.
If it's calche then you already have your base for free.
If it's calche then you already have your base for free.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
I had a dirt road cut, pushed in, graded and compacted. Grade not to exceed 15%. No base...just dirt and rocks and no blasting. Cost $18.94 per foot. Cost included 8 culverts varying from 18" to 3' diameter. The ½ mile road rises about 200' in altitude from start to homesite.
He had to cut through a 150' wide ravine about 70' deep. He built the road up about 25' from the bottom. It makes a gradual turn within the ravine to maintain grade requirements. He started the ravine cut about 150' back and about 200' past it. He had a couple of D9 dozers and grader and excavator along with some backhoes, water truck etc. I saw him knock over some 60' tall Oaks and roll some 10 ton boulders like they were nothing....Amazing....A couple of the boulders dwarfed my full size Blazer. The rest of it was duck soup. Ha ha!
He had to cut through a 150' wide ravine about 70' deep. He built the road up about 25' from the bottom. It makes a gradual turn within the ravine to maintain grade requirements. He started the ravine cut about 150' back and about 200' past it. He had a couple of D9 dozers and grader and excavator along with some backhoes, water truck etc. I saw him knock over some 60' tall Oaks and roll some 10 ton boulders like they were nothing....Amazing....A couple of the boulders dwarfed my full size Blazer. The rest of it was duck soup. Ha ha!
Attachments
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
I had a dirt road cut, pushed in, graded and compacted. Grade not to exceed 15%. No base...just dirt and rocks and no blasting. Cost $18.94 per foot. Cost included 8 culverts varying from 18" to 3' diameter. The ½ mile road rises about 200' in altitude from start to homesite.
He had to cut through a 150' wide ravine about 70' deep. He built the road up about 25' from the bottom. It makes a gradual turn within the ravine to maintain grade requirements. He started the ravine cut about 150' back and about 200' past it. He had a couple of D9 dozers and grader and excavator along with some backhoes, water truck etc. I saw him knock over some 60' tall Oaks and roll some 10 ton boulders like they were nothing....Amazing....A couple of the boulders dwarfed my full size Blazer. The rest of it was duck soup. Ha ha!
He had to cut through a 150' wide ravine about 70' deep. He built the road up about 25' from the bottom. It makes a gradual turn within the ravine to maintain grade requirements. He started the ravine cut about 150' back and about 200' past it. He had a couple of D9 dozers and grader and excavator along with some backhoes, water truck etc. I saw him knock over some 60' tall Oaks and roll some 10 ton boulders like they were nothing....Amazing....A couple of the boulders dwarfed my full size Blazer. The rest of it was duck soup. Ha ha!
