RK24 Hyd Toplink With Backhoe Hydraulics?

   / RK24 Hyd Toplink With Backhoe Hydraulics? #1  

OhioCowboy

Silver Member
Joined
Jul 28, 2009
Messages
166
Location
N. Ohio
Tractor
KIOTI CK3510se HST Open Station w/FEL, RK24 HST w/FEL & Backhoe, DEAD-NH TC33D HST
When I take off my backhoe I'll be disconnecting the hydraulic lines. I'm wondering if I can use those connections to connect to a new valve and toplink cylinder arrangement ...and maybe an arm leveling cylinder so I can adjust from the seat while working? :thumbsup: :thumbdown:
 
   / RK24 Hyd Toplink With Backhoe Hydraulics? #2  
I would guess, probably not since the lines for your backhoe are either on or off when you throw the lever. With a leveling cylinder you would want the lever to stop at different times to apply or not. If that makes any sense.
 
   / RK24 Hyd Toplink With Backhoe Hydraulics?
  • Thread Starter
#3  
Here's what I'm thinking with the shutoff valve and flow divider (i don't know the tech terms of the parts but...)
extra remote.jpg
 

Tractor & Equipment Auctions

JOHN DEERE 544G (A50854)
JOHN DEERE 544G...
2022 Down2Earth 82in x 36ft Two-Car Hauler (A51039)
2022 Down2Earth...
1984 Trailmobile Enclosed Van Trailer (A51039)
1984 Trailmobile...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
2018 Chevrolet Tahoe SUV (A50324)
2018 Chevrolet...
2012 STEPHENS 220BBL CRUDE OIL TRAILER (A50854)
2012 STEPHENS...
 
Top