Mowing Replacing rear wheel on LT166

   / Replacing rear wheel on LT166 #1  

bellaspr

New member
Joined
May 7, 2011
Messages
3
Tractor
LT166
Hi!
I replaced the rear wheel on my LT 166, but now it seems the lever in the back that disengages the wheels so you can push the mower is always disengaged. I am wondering if I put the wheel back on wrong, since their is a groove in the axel and a groove in the rim, but nothing seems to lock them together, so the wheel spins freely.
Any ideas?
Thanks!
Ronnie
 
   / Replacing rear wheel on LT166 #2  
:welcome:

Shouldn't be able to put the wheel on wrong, but do you have the square key in place that goes in the grooves in the axle and wheel? That could have dropped out and if not in place, will not lock the wheel to the axle. If this isn't the problem, pls explain in more detail what you are doing to "spin" the wheel freely.
 
   / Replacing rear wheel on LT166
  • Thread Starter
#3  
I think thats the problem! I see a grove in the rim & the axle, but nothing that stops the wheel from spinning freely. Guess I need to go to the JD dealer and get a new one.
Thanks!
Ronnie
 
   / Replacing rear wheel on LT166 #4  
Prolly just laying on the ground or stuck to the inside of the rim where it fell off. About 1/4" square a couple inches long.
 
   / Replacing rear wheel on LT166
  • Thread Starter
#5  
Thanks again! I will will look around for it. Have a great day!
Ronnie
 

Tractor & Equipment Auctions

2018 Ram 5500 Bucket Truck 4x4 with Versalift VST40 - 45FT Rotating Bucket and Jib Winch (A51039)
2018 Ram 5500...
2006 International 4400 LP Ambulance (A50323)
2006 International...
2021 POLARIS XP1000 RANGER (A51222)
2021 POLARIS...
OIL WORKS INC. AIR TONGS (A50854)
OIL WORKS INC. AIR...
2021 TAKEUCHI TL6R SKID STEER (A51242)
2021 TAKEUCHI TL6R...
PALLET OF PICKUP HITCHES (A50854)
PALLET OF PICKUP...
 
Top