Replacing Oil & Pressure Switch with Gauges YM2000

   / Replacing Oil & Pressure Switch with Gauges YM2000 #1  

tpthibodaux

New member
Joined
Apr 5, 2005
Messages
24
Location
South Louisiana
Tractor
Yanmar 2000
I would like to repalce my Swicthes with Gauges. Can any one tell the part number of the fitting that is used to convert from Metric.

Thanks
 
   / Replacing Oil & Pressure Switch with Gauges YM2000 #2  
use sunpro kits part number is cp7573 for the oil line kit and the part number for the water temp.kit is cp7574.
you can get kits from auto zone and advanced auto parts.
d.wynn
 
   / Replacing Oil & Pressure Switch with Gauges YM2000
  • Thread Starter
#3  
Thanks D. Wynn

This information will be very helpful. I took my Oil and Water sensor to my local NAPA store. We figured out the Water adapter would be part number 701-1549 Metric threads M16x1.50. For the Oil adapter part number 701-1550,701-1546 are 1064T-IL threads would be M 1.00. But unfortulatey they were out. I will take your part# to Auto Zone tomorrow. Will there be a adapter to go from Metric to NPT in this kit.
I bought my first oil filter today. Part Number 1064 seems to fit. I will know for sure when I start her up again.
Thanks
 

Tractor & Equipment Auctions

2025 K2223 UNUSED Double Garage Metal Shed (A53117)
2025 K2223 UNUSED...
2025 AGT M-BKM (A50123)
2025 AGT M-BKM...
2018 HINO 195 16FT BOX TRUCK WITH LIFT GATE (A53426)
2018 HINO 195 16FT...
2015 Caterpillar 410L 4x4 Extendahoe Backhoe Loader (A51691)
2015 Caterpillar...
2009 MAC MFG 53' WALKING FLOOR REFUSE TRAILER (A53426)
2009 MAC MFG 53'...
NEW HOLLAND 706 30 INCH 3PT DIRT SCOOP (A53473)
NEW HOLLAND 706 30...
 
Top