Replacing Oil Pan on Ford 3930

[JD5210]

I was over at a friends today that has a 1999 2WD Ford 3930 and he needs to replace the oil pan because he hit a stump.

He was told the pan was $248 and the gasket is $40. My knowledge of Fords is very limited, but is the part he needs? If wrong can you point me in the correct direction?

Amazon.com : Oil Pan For Ford New Holland Tractor - 81822143 C9Nn6675A 81874150 : Patio, Lawn & Garden

On removing the oil pan, I did a search and found this comment on how to replace the pan - front end to the motor and replace the top two with some longer bolts and undo the hood and role forward it is easy I looked at the tractor and it does look like 2 hydraulic lines for steering on the front axle need to be disconnect.

Is this the best way to do it?

Thanks in advance for any help you can give me.

 

[TractorTech]

That is the pan and gasket you need. D B Electrical is a good company to deal with too.
Since it is a tin oil pan and not cast, you should be able to drop it without moving the front bolster forward.

 

[JD5210]

Thanks for the response.

 

[fishheadbob]

A long time ago I put a nasty gouge in the pan of a 2000. The price of a replacement was staggering. I banged it back into as close to original shape as possible, welded it, and I'm a lousy welder, and tried it out. I did not expect it to hold. I knew I could always buy a new one if it didn't hold, but I sold the tractor a thousand hours later and the patch was still going strong