Leejohn
Elite Member
Are the fittings those no crimp?
replacing JD 420 loader hoses
- Thread starter arkvet
- Start date
- Views: 18481
-
- Tags
- john deere 420
No. It was a dry fit. Farm parts store let me take them home with what I thought the hose Lengths needed to be. If they needed to be different than lengths I'd only be out a couple bucks for longer hose or a free trim if the estimate was too long. Safe way to test the hoses before the crimps were made.
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,693
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
Just saw your post, ARK. I replaced all hoses on the earlier of the 2 4300s I rebuilt.
I went with standard-length pre-made 1/4" hoses from SurpCntr, and JIC-to-ORFS
fittings from DHH. 90-deg adapters from them, two. Cost less than custom hoses.
Some of these JD FELs have restriction adapters in the hose....1/4" hose is a benefit.
Works great.
I went with standard-length pre-made 1/4" hoses from SurpCntr, and JIC-to-ORFS
fittings from DHH. 90-deg adapters from them, two. Cost less than custom hoses.
Some of these JD FELs have restriction adapters in the hose....1/4" hose is a benefit.
Works great.
wdchyd
Elite Member
I'm surprised they didn't make the hose with swivels on the hose where the cyl connection is (instead of using swivel adapters)......it'll work fine either way
