Replacement Springs for and old Fisher Plow

[TimBuck2]

I modified an early 1970s Fisher plow to mount on my FEL. This was my Dad's, the trip springs are original and I am looking to replace them.

The springs are 3 inches OD, compressed length is 14 inches, and non-compressed length is 15 inches.

I also want to replace the spring bars.

Shopping the internet, it is easy to find 3 inch x 13 inch long springs, with spring bars. (spring part no. 27406)

I could pretty easily modify / replace the mounts on the cutting bar mount to accommodate a shorter spring set up (one of the four is already broken off), but I would like to to avoid that.

I have also founda couple of seller with 14.75 inch long springs (replacement part nos. 5323, 21450, 20757) but I have not been able to verify the diameter, or any seller that sells them with the spring bars.

Anyone familiar parts, where to get specs and seller of 14.75 inch version with spring bars? Any advice appreciated.

Tim

 

[BAP]

Have you contacted Fisher to see if they have what you need? Also, if you go on their website you can find dealers near you and inquire.

 

[Rattrapper]

Check with Snow Plow Sales in Gilsum, NH. They have the best prices for all stuff Fisher

 

[RickB]

Central Parts Warehouse.
https://www.centralparts.com/