Tiller Replacement discs for disc tiller

[CECILSSTEEL]

I need to replace the discs on a 1950's Krause disc tiller (single axle 4 disc plow). The disc tiller requires 26 in disc with a 4.5 inch concavity which is higher than the 3.5 inch standard concavity used on harrow discs of this diameter.

Who would be able to supply this type replacement disc or any suggestions on who to contact?

Thanks

 

[kthompson]

I need to replace the discs on a 1950's Krause disc tiller (single axle 4 disc plow). The disc tiller requires 26 in disc with a 4.5 inch concavity which is higher than the 3.5 inch standard concavity used on harrow discs of this diameter.

Who would be able to supply this type replacement disc or any suggestions on who to contact?

Thanks

JD did use a deeper dish blade than some others. You may wish to try Agri Supply (they have stores in the Carolinas and Georgia, internet sales, catalog and phone help. You should have no problem finding them on the internet.

 

[CECILSSTEEL]

Thanks for the input. By good fortune was able to obtain three plow disc blades 26in ellipical 4-1/8 concavity blades from a nearby implement dealer in Lucedale, MS that nearly duplicates the original. Will reuse the fourth blade. This will should get the disc tiller up and going for now.

Have contacted Agri Supply as an option.

Krause has also helped in locating 26in ellipical blades 4-1/4 in concavity in their stock.