thepumpguysc
Elite Member
It all “looks easy”.. all u can do is try.. sometimes the inj body gets rusted in the bore and it takes days of spraying them down with penetrating oil.. so all u can do is TRY..
Have a look at the mounting ear on the inj PUMP..
There’s a timing line on it..
That line corespondents with degree marks stamped into the block..
The line should be lined up or REAL CLOSE to “0*”..
If it isn’t, try moving the pump..
Have a look at the mounting ear on the inj PUMP..
There’s a timing line on it..
That line corespondents with degree marks stamped into the block..
The line should be lined up or REAL CLOSE to “0*”..
If it isn’t, try moving the pump..