Remote Add On Cost

[rebelback]

What can I expect to pay for a rear hydraulic remote add on? What about an additional remote for the front to operate the closing on a grapple? I have a 2010 Case IH Farmall 45 HST.

 

[flatpik6]

Picking up my new Mahindra 5035 tomorrow and I had them add an additional rear remote and a 3rd function kit to the front for the grapple. The additional hardware and plumbing for both the front and rear totaled $1665.00 as part of the purchase deal.

 

[rd_macgregor]

Last time I checked, my dealer wanted roughly $1000 to add one set of outlets. I wonder if there would be a significant cost savings if several sets were added at the same time(ie, if three sets was $2000-$2500 it would be worth doing)?
BOB

 

[jlsmith]

You could go buy the hoses and the cross valve and do it yourself for around $500. I would check ebay, I have found a lot of ready to install kits on there.

 

[jdbnh]

the front setup should be in the $600 to $800 range for the valve, hoses, joystick, etc. the rear is probably around $800 to $1000

 

[Rockgod]

Last time I checked, my dealer wanted roughly $1000 to add one set of outlets. I wonder if there would be a significant cost savings if several sets were added at the same time(ie, if three sets was $2000-$2500 it would be worth doing)?
BOB

Yeah, about a year ago when I checked they wanted $1200 (Farmall 50) for the 1 set. :confused2:

 

[flusher]

What can I expect to pay for a rear hydraulic remote add on? What about an additional remote for the front to operate the closing on a grapple? I have a 2010 Case IH Farmall 45 HST.

My dealer installed these triple remotes on my 2008 Mahindra 5525 when I bought it new--cost $750. They are his personal design, not a factory kit.

 

[bigbull338]

my dealer wanted $750 to install a set of rear remotes in 2010.but i dont know what it would cost to add the 3rd fuction remote.