milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,555
- Tractor
- BX2200, BCS 735
Edited my post and included the link, looks like Volfandt has a good link too.
Regional service tech at a lost on BX24 fan
- Thread starter kchear1
- Start date
- Views: 3588
-
- Tags
- kubota bx24
Edited my post and included the link, looks like Volfandt has a good link too.
stuarth
Gold Member
I was just looking at Milkmans profile pic! "You better get that tractor back on the pavement or you will need a new fan" What were they thinking of on this design and not changing it on the NEXT model??? I would fire them.
!
TheFlatlander
Gold Member
Thanks to both. I like the Idea and think that I can whip up something simular.
Berniep
Platinum Member
The skidplate was one of the first things I made for my BX23.
Here is a post with the picture of the skidplate I made.
Back then there was a guy who ran over a rock and busted the transmission case on the bottom where it is closest to the ground so I made mine to go under it and under the bolts at the hitch frame. Only takes a couple of minutes to take off for oil and fluid changes.
http://www.tractorbynet.com/forums/kubota-owning-operating/58856-got-my-bx23-pics.html#post659614
Here is a post with the picture of the skidplate I made.
Back then there was a guy who ran over a rock and busted the transmission case on the bottom where it is closest to the ground so I made mine to go under it and under the bolts at the hitch frame. Only takes a couple of minutes to take off for oil and fluid changes.
http://www.tractorbynet.com/forums/kubota-owning-operating/58856-got-my-bx23-pics.html#post659614