Recommendation for block heater for John deere 4300 hydro

   / Recommendation for block heater for John deere 4300 hydro #11  
The 4300 is equipped with an intake air heater system. See page 22 of Operator's manual.

Activate the system by pushing in on the key switch.

above 0F: hold key in for 10-15 seconds.
0F to -10F: hold key in for 30 seconds.
below -10F: hold key in for 45 seconds.

Start engine. If it runs rough, activate the system by pushing in the key switch until engine runs smoothly.
Intake heater for combustion air. A little different than hearing the engine block.

For small engines In cold climates there are three basic heating methods. Block heater, in line heater or a tarp and a small fan aided heater. If no electricity available a pan of hot ashes will work.

In cold climates you will find that the magnetic oil pan heaters or the dipstick heaters do not perform well. Battery blanket heaters do help.

Larger equipment has much more sophisticted

heating equipment.
 
Last edited:
   / Recommendation for block heater for John deere 4300 hydro #12  
You can also put a flood light to shine on your oil
pan as this will heat the oil
I like simple things like installing a heater in the
heater hose, cut heater hose install hose heater
install the two hose clamps done! Just plug it in
when needed!

willy
 

Tractor & Equipment Auctions

2022 Case IH Steiger 470HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
WITTIG VACUUM PUMP (A50854)
WITTIG VACUUM PUMP...
2011 Ford F-250 4x4 Pickup Truck (A50323)
2011 Ford F-250...
2017 Ford F-550 Valve Maintenance Truck (A50323)
2017 Ford F-550...
2021 FORD F-150 XL EXT CAB TRUCK (A51406)
2021 FORD F-150 XL...
PENDING SELLER CONFIRMATIONS (A51222)
PENDING SELLER...
 
Top