rear wheels dished in vs dished out

   / rear wheels dished in vs dished out #1  

deepsnow

Bronze Member
Joined
Nov 4, 2001
Messages
92
Location
bayview township, bayfield co. WI
Tractor
NH TC25D
A minor brain fart resulted in my TC25D set up with wheels dished in(Ag tires ?R1). I forgot to inform the dealer to have the rear wheels dished out. Dishing out would gain a few inches of width. Any experiences with this particular model ( or any other compact diesel) regarding stablilty of dished in vs. dished out? What would be the correct procedure to reverse the wheels? Any recommendations regarding lifts/jacks? Any feedback concerning tire chain clearance would be appreciated.
 
   / rear wheels dished in vs dished out #2  
IMHO wider is always better with the compacts. Your owner's manual should have the process documented, should be a simple swap. Re: jacks - get a large floor jack, my 7000# jack cost less than $100.
 

Tractor & Equipment Auctions

Comfort Chute H Series Hoof Trimming Trailer (A50774)
Comfort Chute H...
175 Gallon Spray Rig Pull-Type (A52128)
175 Gallon Spray...
AGT Agrotk 680 Drop Hammer Attachment (A47384)
AGT Agrotk 680...
UNUSED JCT SKID STEER QUICK ATTACH 72" TILLER (A51244)
UNUSED JCT SKID...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2000 FORD F450 SUPER DUTY SINGLE CAB FLATBED TRUCK (A51406)
2000 FORD F450...
 
Top