Rear SCV from Loader Joystick

Kfbeal · Dec 9, 2008

Yea, I believe that is what this kit is for. That's the same place the loader ties into as well. If you add the other block for the additional SCV, then there's no more room I believe in between the fender. The price I got for the kit is $520 for material.

MarkV · Dec 10, 2008

Kfbeal said:
Yea, I believe that is what this kit is for. That's the same place the loader ties into as well. If you add the other block for the additional SCV, then there's no more room I believe in between the fender. The price I got for the kit is $520 for material.

OK I get it now. The restriction to one remote has nothing to do with the hydraulics, it has to do with the available space. You know if you need more than one remote you can use an after market valve and make a bracket that attaches it someplace. Not as pretty but if I needed the hydraulics who cares.

MarkV

Kfbeal · Dec 10, 2008

Where would I tap into with the after market valve. I guess I'm just not following. I know very little about hydraulics from the tractor side of it.

MarkV · Dec 10, 2008

Well I am not the best source of information on hydraulics, you should post in the hydraulic forum for the pros. Yet your kit or an after market valve body is going to tap into a power beyond port somewhere and also have a return line that taps in somewhere on your particular tractor. Once you have the in and out plumbing you can hook most any valve to the system.

MarkV

kennyd · Dec 10, 2008

Kfbeal said:
Where would I tap into with the after market valve. I guess I'm just not following. I know very little about hydraulics from the tractor side of it.

That is why I asked you to price the Power Beyond kit...with it you can add a new valve(s).