SRF34
New member
- Joined
- Oct 23, 2004
- Messages
- 20
Any suggestions on recovering a torn vinyl seat on a 1320. Can the cover alone be purchased? Thanks.
Re-Cover Seat
- Thread starter SRF34
- Start date
- Views: 1060
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I'm not sure what type of seat you have.. but I'v bought marine grade vinyl and recoverd many a seat if they had either a wood bottom, or if it used a compression spline that held the vinyl to the bottom metal on the seat.. etc.
Soundguy
Soundguy
PineRidge
Super Member
I had a tractor seat re-covered by a upholstery shop. Set me back $75.00 and looked better than new.
fire72
Bronze Member
I don't believe the cover alone can be purchased, at least not from New Holland. My 1920 had a rip in the seat when I purchased it, so I checked with NH parts about getting it replaced. Turned out I was looking at replacing the entire seat pan for $200. I decided to live with the rip.
It it's past the live with it stage, check into generic aftermaket covers, or, as suggested above, an upholstry shop.
It it's past the live with it stage, check into generic aftermaket covers, or, as suggested above, an upholstry shop.
