Quick Hitch Questions

[TractorGuy]

Looks like Agri Supply also sells that hook separate.

Edit: They only show one in stock at their Greenville NC store so somebody better grab it if the inventory is correct.

 

[CoachEarl]

Has anyone needed to extend their PTO on your shredder?

 

[California]

I needed a PTO extender when I bought a used rototiller. Tractor Supply has them.

 

[CincyFlyer]

I have the similar 2540, and an HF QH. I welded up my own extended hook (with an extra row of holes) so that it will work with anything. Watch the fender extensions if you raise the thing with the top link pulled inward!

 

[TheMan419]

So I just got my qh. The hook seems useless. The adapter works. Both my bush hog and tiller are less than 3 years old. The top hook will not work with either of them. I put bushings on the lower pins on both implements to reduce slop.

The qh comes with a pin. It is useless. Bent after a couple hours work. Into the trash it went.

I will need a pto shaft extender. The shaft on the tiller is now just a bit short for comfort. 2-3 inches of overlap is just not enough.

 

[goeduck]

So I just got my qh. The hook seems useless. The adapter works. Both my bush hog and tiller are less than 3 years old. The top hook will not work with either of them. I put bushings on the lower pins on both implements to reduce slop.

The qh comes with a pin. It is useless. Bent after a couple hours work. Into the trash it went.

Brand?

 

[CincyFlyer]

So I just got my qh. The hook seems useless. The adapter works. Both my bush hog and tiller are less than 3 years old. The top hook will not work with either of them. I put bushings on the lower pins on both implements to reduce slop.

The qh comes with a pin. It is useless. Bent after a couple hours work. Into the trash it went.

I will need a pto shaft extender. The shaft on the tiller is now just a bit short for comfort. 2-3 inches of overlap is just not enough.

I had to shave the hook of my HF QH by 1/2" or so, as well as weld on an extension to have another set of holes and to offset the hook away from the QH. An hour of work and it's a whole new ballgame.