darrenjttu
Silver Member
I have the EA 60 inch rotary cutter. It is not QH adaptable they say. Has any one made an adapter for the top link connection?
quick hitch on a rotary cutter
- Thread starter darrenjttu
- Start date
- Views: 7424
-
- Tags
- quick hitch
TractorGuy
Elite Member
- Joined
- Sep 15, 2013
- Messages
- 4,591
- Location
- N. FL
- Tractor
- John Deere 4310 CUT, Ford New Holland 575E Industrial Backhoe, John Deere F725 Front Mount Mower
I use the #80717 Adapter Bracket from Agri Supply on my Agmate finish mower.
It doesn't work so great on my brush cutter. I think I used a short piece of chain on that last time.
It doesn't work so great on my brush cutter. I think I used a short piece of chain on that last time.
Last edited:
MORRISONSTEEL
Platinum Member
Either use similar to what is pictured or replace the rear arms with chains. That is the primary issue with rotary cutters and quick hitches (beyond physically not fitting), the cutter side needs to float so that you can drive out of a low spot and not bend the rear support arms as you go up the hill. Or modify your rear arms with hinge that only allows it to hinge to the top and not towards the bottom.