Quick attach?

[Poorboy04]

I'm looking for a quick attach system for my 2001 tc35 with 16La loader. I called my local new holland dealer they want $795 for the part that bolts to the loader arms and $200 for the bracket that you weld on your bucket. Plus it will probably cost another $200 to have the current brackets cut off the bucket and the plate welded on. Does anyone know of a cheaper solution that works just as good.

 

[bspeedy]

The plate for your bucket should be around 100 bucks. 200 is too much. I would not cut and weld the bucket for you for 200 bucks. Lots of work and takes a while. Perhaps you should consider buying a new bucket (or a welder and grinder).

I think the 795 for the tractor side is a lot, but you won't regret it. I paid 550 for mine from Kubota. Thought that was fair.

 

[Poorboy04]

Yes I think the prices are to high to. That's why I was wondering if there was any cheaper alternatives.

 

[Poorboy04]

I thank the prices are high to. That's why I was looking for a cheaper aftermarket alternative.

 

[jloven]

Check out titan attachments. They have one that I used on my 16la loader. Also tomahawk sells mounting plates for about $75

Pin On to Skid Steer Quick Tach Adapter Spacer Brackets Cross Brace Latch Weld

 

[BarnStangz]

Check these guys out: Attachments Using Quick Attach System

I was going to go for it with my TC34DA but I have the 14LA loader and really don't want to lose the lift capacity with the quick attach setup. Your 16LA has more sac, so I bet you won't miss the added weight. The prices you listed don't seem too terrible, if the parts are made in the USA expect to pay a little more, but I think the benefit is there... There are a couple other places out there that make the quick attach and I know eBay is a good place to find the weld on plates.

Tractor Attachments And Skid Steer Attachments For Any Tractor Or Skid Steer
Spartan Equipment | Skid Steer Attachments, Mini Excavator Attachments

Few other places you can check out.