BravoXray
Veteran Member
- Joined
- Dec 17, 2019
- Messages
- 2,379
- Location
- Nothern Indiana
- Tractor
- Kubota BX2230, John Deere 430 Diesel
Was fabricating some stands for the subframe on my Nova project, and after the MIG gun fell on the floor for the third time, I decided to make a holder. A 4" piece of 1" iron pipe, a 7" length of 1" X 1/4" bar stock, a HF magnet, a 1/4" bolt and nut, and a few squirts of Kubota dark gray paint, and this is what I came up with. I think it'll do the job just fine.