I'm looking at purchasing a W-W Aluminum 2-horse bumper pull trailer. Should I be concerned about the age of the trailer? It has been well-kept and shows no sign of damage. Does anyone have experience with W-W trailers? Is there anything I need to inspect for metal fatigue, etc.? Thanks.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Take a HARD look underneath at the chassis as well as the tires and hubs, Horsey trailers sit for extended periods of time and mostly sit outside in the elements.
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,988
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
W-W trailers are pretty well built for an aluminum trailer. Check aluminum internal corners and frame of the box itself for stress cracks on the welds.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
The issue with an aluminum trailer is repairing it if it cracks or has a failure. Has to be TIG welded or pulsed MIG.
ning
Elite Member
Look for cracks on the sidewalls of the tires as well, and/or date codes... or just assume you'll be replacing the tires.
scootr
Super Member
- Joined
- Aug 9, 2022
- Messages
- 8,453
- Location
- Temecula California
- Tractor
- Kubota MX5200 HST, 773 Bobcat, Cat forklift
Aluminum horse trailers are subject to stress cracks. Get underneath it with a flash light and a flat screwdriver to scrape and check all the structural welds.
