Putting a 2.75" hardened steel pipe on rear blade for plowing in soft conditions?

   / Putting a 2.75" hardened steel pipe on rear blade for plowing in soft conditions?
  • Thread Starter
#71  
BTW I did pick up 10ft of 5.5" dia oilfield pipe today. It looks to be about 5/16th thick and weight was about 80-100lbs. $100 for the pipe and my fabricator quoted me about $160 to cut a slit and weld on end caps.
 
Last edited:
   / Putting a 2.75" hardened steel pipe on rear blade for plowing in soft conditions? #72  
Those work great on pavement or hard frozen ground. On softer ground they just make 2 trenches.
Then make wide skates!
 
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2010 Turfco Mete-R-Matic III Pull-Behind Top Dresser (A54811)
2010 Turfco...
2017 Ford Explorer SUV (A53424)
2017 Ford Explorer...
(3) ROLLS OF 4' GALVANIZED FIELD FENCE (A54757)
(3) ROLLS OF 4'...
11ft S/A Fuel Tank Trailer Frame (A51691)
11ft S/A Fuel Tank...
2009 Freightliner B2 School Bus (A55852)
2009 Freightliner...
 
Top