Pulled the trigger! 5045D is being assembled as we speak!

   / Pulled the trigger! 5045D is being assembled as we speak! #1  

patricku421

New member
Joined
Nov 11, 2014
Messages
20
Location
Cleveland, TX
Tractor
John Deere 5045D, International Farmall 140
Hello there. New to the forum from Texas. I just bought my first new tractor, a John Deere 5045D, with a 512 loader, bail spear and a 6' brush hog. I am currently waiting for the dealer to finish assembling it so I can go pick her up. My question for everyone is, does anyone have any dimensions for the tractor with the loader attached. I'm not quite sure I have enough trailer to haul it, and I need to get it about 100 miles to the farm.

Thanks in advance!
 
   / Pulled the trigger! 5045D is being assembled as we speak! #2  
You can haul it on a 20ft bumper pull with the tail wheel of the shredder hanging off a bit. I would go with a 24ft low boy and 5K axles
 
   / Pulled the trigger! 5045D is being assembled as we speak!
  • Thread Starter
#3  
That's what I was guessing, but I wasn't 100% sure. I am yet to see what the tractor looks like with the loader attached. Currently, I have a 16' lowboy, and a 28' gooseneck, but no way to pull the gooseneck at the moment. The way its looking, I may have to just make two trips.
 
   / Pulled the trigger! 5045D is being assembled as we speak! #4  
You can fit it all. Just lift the loader up in the air and put a piece of angle iron on the lift cyl. so it wont be able to go down. Pull the tractor all the way up and put a red flag on the mower wheel.. Be very sure your tires are in good shape!
 

Tractor & Equipment Auctions

2016 WITZCO RG-35 RGN LOWBOY TRAILER (A50459)
2016 WITZCO RG-35...
John Deere 455G Loader (A48837)
John Deere 455G...
2012 MACK PINNACLE (A50854)
2012 MACK PINNACLE...
2011 WESTERN STAR 4900 SB (A50854)
2011 WESTERN STAR...
Killbros 260 Seed Conveyor (A51039)
Killbros 260 Seed...
RIDE AND DRIVE INFO (A50774)
RIDE AND DRIVE...
 
Top