Pto

[Lea]

Can anyone tell me the size and speed of front facing pto on a Kubota B2320 and the # of splines
Thank you

 

[CharlieKtractor]

can't believe no one has replied to this--I'm useless and don't have that particular tractor

 

[Lea]

I can't believe it either charlyktractor I didn't think it was that tough a question

 

[C4Ranch]

From memory, my old b7500 was 2,500 rpm and the pto shaft looked standard.

 

[RFB]

Here are the 2320 specs Kubota Tractor Corporation - Tractors | B Series | B2320/B2620/B2920

The mid pto speed is 2500. It does not mention spline size. I will see if my snowblower has a size listed.

This post http://www.tractorbynet.com/forums/...440-front-mount-snowthrower-b2781a-b2782.html mentions "mid PTO (10 spline 31/32")"

and the only specs I was able to find from Kubota are for the rear:

POWER TAKE OFF
Live Continuous Running
Rear PTO 2 Speed
SAE Std 1 3/8 Six Spline
540 rpm @ 2773 Eng. rpm
960 rpm @ 2722 Eng. rpm
Mid PTO 1 Speed
2500 rpm @ 2750 Eng. rpm

from this document:

http://tinyurl.com/n4jzogc

 

[Tractor Seabee]

I have a BX25 and the dealer told me if I wanted a MMM I had to get a K brand as nothing else will work. He also stated the Mid PTO shaft is unique to Kubota and difficult to match for driving snow blowers and MMM. Take that with a grain of salt. My BX manual says it is 17 HP at 2500 RPM also and the spline is: USA #5 (Kubota) 10 tooth involute. That info is on the Specification page of the manual. I would bet yours is the same, check your manual or check with Messicks a TBN advertiser Kubota dealer for confirmation. Time to walk the net if you are looking for some kind of non-standard match-up parts.

Ron

 

[RBA50]

Tractor Seabee has it correct, according to my B2320 Manual. 2500 RPM is at 2750 engine RPM. Spline is USA #5 (Kubota) 10 tooth involute.