Snowblower PTO yoke advice for snow blower

   / PTO yoke advice for snow blower #1  

Mrlucky7

New member
Joined
Oct 24, 2007
Messages
6
Location
N.W. Montana
Tractor
07 Montana 3040
Hey guys, i need to replace the tractor side coupler on my PTO shaft as it came apart, any ideas where to go/ buy? typical 6 spline, 1 3/8" U joint cap diameter is 1.062 IMG_4041.jpg
 
   / PTO yoke advice for snow blower #2  
I had my PTO shaft work done at "Six States". I don't know if you live near a branch or not. They know what they're doing and where to source the parts to do it. They aren't cheap but they are not unreasonably expensive either.
 
   / PTO yoke advice for snow blower #4  
shear pins?? From the pics the u joint look as it is still intact
 
   / PTO yoke advice for snow blower #5  
Hey guys, i need to replace the tractor side coupler on my PTO shaft as it came apart, any ideas where to go/ buy? typical 6 spline, 1 3/8" U joint cap diameter is 1.062View attachment 632552

You can get PTO parts at pretty much every tractor dealer. TSC is hit and miss these days.
 
   / PTO yoke advice for snow blower #6  
It's hard to say from that picture just what you have.
There are several styles of pto shafting and sizes.
That looks almost like a shear pin yoke, they usually are on the implement end of the shaft.
Once you have determined the style then you can find a new yoke.
The link attached may help you to narrow down what you need.
Identify Agricultural PTO
 
   / PTO yoke advice for snow blower #8  
It almost looks like you have a pto shaft with a shear bolt built into it, but I’ve never seen one with two bolts.
IMG_6462.JPG
 
 

Tractor & Equipment Auctions

2004 BMW Sedan (A51694)
2004 BMW Sedan...
RoGator RG1100C (A53472)
RoGator RG1100C...
UNUSED HURRICANE MSC2020F ALL-STEEL CARPORT (A51248)
UNUSED HURRICANE...
DESK (A53843)
DESK (A53843)
Airco Tig Welder (A51691)
Airco Tig Welder...
2021 BOBCAT T450 SKID STEER (A51246)
2021 BOBCAT T450...
 
Top