PTO SEAL
- Thread starter king1010
- Start date
- Views: 948
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
I answered your PM.
One thing I should have mentioned...do you have a replacement seal? I expect you'll find the seal to have a metal backing plate (or thin plates sandwiching the rubber). Most of them are good for a one time use. Also, just having the replacement seal may help you figure it out. I'm pretty sure you'll have to use a screwdrive or other flat type bladed tool (two of them, actually) to pry it out. More then likely, there is a bearing on the other side of that seal. Although that bearing may require replacement too, don't go ballistic and destroy it when you pull the seal. You may need it.
One thing I should have mentioned...do you have a replacement seal? I expect you'll find the seal to have a metal backing plate (or thin plates sandwiching the rubber). Most of them are good for a one time use. Also, just having the replacement seal may help you figure it out. I'm pretty sure you'll have to use a screwdrive or other flat type bladed tool (two of them, actually) to pry it out. More then likely, there is a bearing on the other side of that seal. Although that bearing may require replacement too, don't go ballistic and destroy it when you pull the seal. You may need it.
