pto rpm on 1700

   / pto rpm on 1700 #1  

sirgknight

Silver Member
Joined
May 21, 2004
Messages
159
Location
South Georgia
Tractor
Early model YM1700
My pto rpm lever has three positions. Could someone please tell me which position is rated at 740 rpm? I have been pushing the lever all the way down (the lowest lever position) to run my equipment. Is this correct? I don't have a manual. Thanks.
 
   / pto rpm on 1700 #2  
I'm pretty sure your correct....you should be at or near 540 RPM in the first position (low) and depending what engine RPM you running.

Mark
 
   / pto rpm on 1700
  • Thread Starter
#3  
using my finishing mower i operate on the little red mark i think about 2500 rpm. i was hoping someone had a manual that would show exactly which gear is what rpm, although i've never had any problems with equipment running in that lever position.
 
   / pto rpm on 1700 #4  
The YM 1700 only runs so fast, it has a governor that keeps it from running any faster. If you put it down in the lowest position, and run the tractor at the highest RPM, it will be right around 540 rpm at the pto. The engine will be running around 2400 rpm, but of course the meter may be off a little, so it may not be exact, but close enough. I run mine that way all the time, and it works out great.
 
   / pto rpm on 1700
  • Thread Starter
#6  
thanks for the info everybody. i feel better about my equipment now..
 

Tractor & Equipment Auctions

2015 International DuraStar 4300 26ft. Box Truck (A51692)
2015 International...
2007 International 7600 Tandem Truck, VIN # 1HSWYAHR37J478209 (A51572)
2007 International...
2023 CATERPILLAR 259D3 SKID STEER (A51246)
2023 CATERPILLAR...
2019 MACK GR64F TANDEM AXLE CEMENT MIXER TRUCK (A52577)
2019 MACK GR64F...
2018 Gatormade 20+5 Gooseneck Trailer (A52748)
2018 Gatormade...
2007 MACK CV713 WINCH TRUCK (A52472)
2007 MACK CV713...
 
Top