Pto lever
- Thread starter hoot1293
- Start date
- Views: 1227
kthompson
Elite Member
- Joined
- Sep 12, 2008
- Messages
- 3,526
- Location
- South Carolina
- Tractor
- Kubotas B2710, M6800, L6060 cab, Volvo EC excavator, 2 ZTRs and various implements.
If it is mechanical linkage yes. I also oil the lift linkage from time to time for they are working joints and can rust.
CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 9,166
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
You know, the PTO lever on the Fordson is sluggish as well. I've always just accepted the action. but will look into the friction aspect and see if it can not be made better.
But you know, I have never even looked at the linkage, just pulled on the lever until the PTO engaged. this for over thirty years.
And it worked much the same just yesterday when I had the old gal out for a "frisky". ;-)
But you know, I have never even looked at the linkage, just pulled on the lever until the PTO engaged. this for over thirty years.
And it worked much the same just yesterday when I had the old gal out for a "frisky". ;-)
Last edited: