metalbender
Veteran Member
Haven't seen anything on PTO chippers. Must be looking in the wrong place. Ordered a Woodland Mills TF68 last Thursday. Got notice today that it has shipped. Much better than the lead time they had on their website.
PTO chippers
- Thread starter metalbender
- Start date
- Views: 1091
-
- Tags
- pto
CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 5,848
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
If you want, I can snap pictures of a couple of chip piles of hemlock that recently came out of my MacKissic Chipper shredder ?
I chip for the chips , not to reduce the brush. Burning works for that.
cholland
Silver Member
There are some other threads on the topic. I shopped around a few years ago when I was in the market and ended up with the Woodland Mills 68. It's a good solid chipper. Good size for a 30+ hp tractor. Watch the punky stuff or branches with a lot of leaves, it will clog up. I only chip up to about 3-4 inches, anything larger than that is likely firewood.
bearthebruce
Platinum Member
- Joined
- Jul 26, 2018
- Messages
- 544
- Location
- Property is in Floyd County VA
- Tractor
- '05 Massey Ferguson 1533; '22 LS MT125, '23 Kubota SVL65-2
Look in the attachments forum. There are lots of threads on PTO chippers.
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 6,532
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
I sure would like to have the improved TF68. The high speed flywheel and gas shocks would be nice to have.
I have the older WC68. No more than I use it, it will have to do. But the pro model looks nice.
I have the older WC68. No more than I use it, it will have to do. But the pro model looks nice.