PowerTracManiac
Silver Member
Starting to prep my stump grinder for use. Wondering how it worked out to switch the direction of the wheel rotation to throw chips away from the machine?
PT-1418 stump grinder spin direction?
- Thread starter davesisk
- Start date
- Views: 6349
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,964
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Not at all familiar with the machine or the stump grinder but... The easiest way to tell what direction the wheel should rotate is by looking at the stump grinder teeth. The carbide MUST rotate with the cutting edge impacting the wood. Clockwise or counter clockwise don't matter as it's all in the tooth direction as it pertains to the cutting edge. My stump grinder uses Greenteeth (Green manufacturing) wearsharp, solid carbide teeth. 700 series.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 63,312
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I bumped up several threads on the subject to the top of the PowerTrac forum for reference. Hope that provides some info for you.
PowerTracManiac
Silver Member
Awesome!
Thnks for bumping the threads- very helpful.
Waiting for PT to get back to work after their 4rth of July week off.
Have alot of questions for Terry, haha
Thnks for bumping the threads- very helpful.
Waiting for PT to get back to work after their 4rth of July week off.
Have alot of questions for Terry, haha
