Pricing on Kubota MX5200

[Kyle602]

Hello All,
Love the site!
Been lurking on the site for a while and have learned quite a bit but still plenty to learn for sure!
I'm considering purchasing my first tractor and believe it will be an MX5200 HST 4wd with FEL.
Working with the dealer on pricing and right now we're at $31,525 for the tractor, loader with 3rd function and 72" Terra Force grapple.
Does this seem like a fair price for this rig?
Would like to have rear remotes for top and tilt but may have to add that later..., dealer wants about 2500 so that may have to wait.
Thanks in advance for any input / suggestions!

 

[nybirdman]

You can "build" and price any Kubota tractor on their website less about 10-15% for final price.I know the third function is about $1,000 installed don't know on the grapple(check on their site for a price).
All in all doesn't sound too bad;nice choice.We have had great luck with our(4) Kubotas.

 

[jeff9366]

Florida is very liberal with sales tax exemptions for ag and forestry equipment.

Basically, you self declare whether you fit one of the exempt categories.

I am ag sales tax exempt and my main work is trail and community-common maintenance, which includes tree work, in a large residential development.



If you will be doing considerable bucket work, consider the L2296 SSQA 72" Heavy-Duty, Round-Back Bucket option.

 

[skipperbrown]

As noted, go to the Kubota website and use the build your tractor to find the retail price and then work for a 10 to 15% discount. Read up on grapples in the forums. While your tractor can handle a 6' grapple, I would recommend one a 5' foot. However, it depends on your intended use. Two rear remotes for $2500 seems high. I'm thinking I paid about 1/2 that on mine, but I'm not sure.

 

[Kyle602]

Thanks for the input!
I'll look into the HD bucket and 5' grapple vs 6'.
Would a 5' standard bucket be a better option than the 6' standard?
I think the $2500 was for the 2 remotes and cylinders for top and tilt, does that seem high even with the cylinders?
Thanks!

 

[nybirdman]

The HD round-back bucket is a nice upgrade;very stout;I would think a 6' with that tractor.In a pinch you can run your third function to the back to run one cylinder(Hoses).

 

[jeff9366]

Thanks for the input!
I'll look into the HD bucket.
Would a 5' standard bucket be a better option than the 6' standard?

Buy the HD RB Bucket in whatever width the standard bucket comes in.
(My error in suggesting 60" rather than 72".)

 

[jeff9366]

Florida is very liberal with sales tax exemptions for ag and forestry equipment.

Basically, you self declare whether you fit one of the exempt categories.

I am ag sales tax exempt and my main work is trail and community-common maintenance, which includes tree work, in a large residential development.

My Kubota dealer keeps the simple Florida sales tax exempt forms in inventory.

 

[Kyle602]

Buy the HD RB Bucket in whatever width the standard bucket comes in.
(My error in suggesting 60" rather than 72".)

Got ya, the standard is 6 on that loader.
Thanks

 

[Kyle602]

Made an offer of $33k out the door for MX5200 HST with FEL, bucket, 3rd function, Terra Force grapple with 2 lids, 2 rear remotes with top/tilt cylinders.
Not sure if this is a great deal but seems to be in line with quotes from nearby dealers.
Still waiting to hear back.

 

[kenmac]

I was quoted $1000.00 for a single set of remotes. Not installed.
There are two different remotes. I believe one set requires you to hold the lever down to provide flow. the other set , the lever stays in position for continuous flow until you move the lever to the off position

 

[Rmart30]

Hello All,
Love the site!
Been lurking on the site for a while and have learned quite a bit but still plenty to learn for sure!
I'm considering purchasing my first tractor and believe it will be an MX5200 HST 4wd with FEL.
Working with the dealer on pricing and right now we're at $31,525 for the tractor, loader with 3rd function and 72" Terra Force grapple.
Does this seem like a fair price for this rig?
Would like to have rear remotes for top and tilt but may have to add that later..., dealer wants about 2500 so that may have to wait.
Thanks in advance for any input / suggestions!

if you are financing go ahead and get the rear remotes now. Dived the cost into months of payments and it changes it very little.

How much are they wanting for the grapple ?

My best advice would be to shop every dealer withen 100 miles of you. Prices for me varied as much as $2200 for the same identical tractor from different dealers.

 

[cathy liebchen]

Probably worth looking at upgrading to the MX5800 for a small difference in price. We would have gone that route if I wasn't having to trailer it several times a year between farms

 

[Kyle602]

if you are financing go ahead and get the rear remotes now. Dived the cost into months of payments and it changes it very little.

How much are they wanting for the grapple ?

My best advice would be to shop every dealer withen 100 miles of you. Prices for me varied as much as $2200 for the same identical tractor from different dealers.

Price of the grapple is $1900, I've been shopping dealers within a couple hours of here and there has been some difference in prices.

 

[Kyle602]

Probably worth looking at upgrading to the MX5800 for a small difference in price. We would have gone that route if I wasn't having to trailer it several times a year between farms

Lol, started out looking in the 30hp range, after pricing them thought for just a bit more could get a 4701..., then looked into the 4800 vs the 4701, and for just a bit more can get the 5200 w turbo and a few other upgrades.
Gotta stop somewhere..., really think the 5200 will be more than I really need for most things I'll be doing and really pushing my budget as it is..., at least according to my money manager!

 

[Rmart30]

Lol, started out looking in the 30hp range, after pricing them thought for just a bit more could get a 4701..., then looked into the 4800 vs the 4701, and for just a bit more can get the 5200 w turbo and a few other upgrades.
Gotta stop somewhere..., really think the 5200 will be more than I really need for most things I'll be doing and really pushing my budget as it is..., at least according to my money manager!

If the price between a L and a M is close go with the M.

 

[Kyle602]

Well looks like I'm pulling the trigger on the MX5200 4wd HST with loader, bucket, 3rd function, grapple and filled tires.
Local dealer was great to work with..., would have liked to get the rear remotes and top-n-tilt but will have to add that later.
Thanks to all for the advice / input!
I'll have many more questions..., really appreciate this great forum and how helpful everyone is!