Hi all,
I have a project I want to do and wonder if anyone has tapped into the power beyond on a 2840 or similar Montana tractor. I have access to a couple 3 point hydraulic tools like a 3 point back hoe. So setting up an accessory power beyond would seem to be something I should put on my list.
I believe this is from the pump to the loader and the oil return hose under those two lines.
![20180107_123650[1].jpg](https://www.tractorbynet.com/forums/data/attachments/506/506943-3a5ce7f74a193e59d175fd286b7838c3.jpg "20180107_123650[1].jpg")
That above block also feeds the rear remote fittings with a hard line going to the top of the valve in the above photo.
![20180107_121851[1].jpg](https://www.tractorbynet.com/forums/data/attachments/506/506986-576a10589cf91cd01d063a83244b3e59.jpg "20180107_121851[1].jpg")
Here is the FEL valve set and the two lines that have no quick disconnects one line goes to the valve in the first photo and the other goes to the back for an oil return.
![20180120_115156[1].jpg](https://www.tractorbynet.com/forums/data/attachments/506/506995-436c05a7ee969428eb4aa691fb973b8c.jpg "20180120_115156[1].jpg")
My question is how did you or how would you tap in for a rear power beyond connection. Anyone have photos of how they did it? I believe tapping in at the valve shown in the first photo would be the starting point.
I have a project I want to do and wonder if anyone has tapped into the power beyond on a 2840 or similar Montana tractor. I have access to a couple 3 point hydraulic tools like a 3 point back hoe. So setting up an accessory power beyond would seem to be something I should put on my list.
I believe this is from the pump to the loader and the oil return hose under those two lines.
That above block also feeds the rear remote fittings with a hard line going to the top of the valve in the above photo.
Here is the FEL valve set and the two lines that have no quick disconnects one line goes to the valve in the first photo and the other goes to the back for an oil return.
My question is how did you or how would you tap in for a rear power beyond connection. Anyone have photos of how they did it? I believe tapping in at the valve shown in the first photo would be the starting point.