Power Beyond for 4310 question.

[Tractors4u]

I recently installed a 3rd SCV on my 4310 and due to the impending purchase of a backhoe I will be needing power beyond. Any of you installed P.B. on a 4210, 4310, or 4410? How was it? I had to take the seat, seat panel, wheel and fender off the tractor for the SCV. Will the seat and panel have to come off this time?

 

[rockyridgefarm]

Easiest thing i ever did! "Um, dealer, please install PB, while yer at it..." Real easy!
Just kiddin!

But they did give me the original plumbing, and if I am not mistaken, there wasn't much, like it is all back there and no major dis assembly. I will check it out, later....

 

[Tractors4u]

Removing the seat and seat panel was necessary to get the control lever for the 3rd SCV in. I'm thinking, and I don't often do that, I'm thinking that the seat and seat panel shouldn't need to be removed this time because there is no lever to install. I am going by the dealers today and talk to a mechanic.

 

[rockyridgefarm]

I recommend you just bring it to work and let some propulsion guys handle it, and work a few mods while they're at it...

 

[Tractors4u]

Yeah I was thinking that a turbo pump from the SSME (Space Shuttle Main Engine) would bump the hydraulic pressure just a wee bit. I went to the dealer today to ask a few questions about installation. I told the owner I had a 4310 with the 3rd SCV and I wanted to add power beyond. He said he didn't think he had seen a 4310 with that many hydraulic outlets before. He had never dealt with me before.