Piranha toothbar on MT125

   / Piranha toothbar on MT125 #1  

LScraig

New member
Joined
Aug 12, 2018
Messages
21
Location
Mequon WI
Tractor
LS mt125
I'm thinking of buying a Piranha Tooth Bar for my LS MT125 and have a couple of questions for somebody who might already have one on their MT125: 1) What size did you order (I'm thinking 49 3/4")? 2) Did you encounter any installation problems due to those "crimps" in the bucket sidewalls?
 
   / Piranha toothbar on MT125 #2  
I don't have an LS but my since sold original bucket had a crimp also, I measured the inside of the bucket and it fit perfectly. What are your plans for use, reason I ask is I Like my ratchet rake better for my needs, only thing the PTB is better for is digging.. You can't really dig with a RR..
 
   / Piranha toothbar on MT125
  • Thread Starter
#3  
I don't have an LS but my since sold original bucket had a crimp also, I measured the inside of the bucket and it fit perfectly. What are your plans for use, reason I ask is I Like my ratchet rake better for my needs, only thing the PTB is better for is digging.. You can't really dig with a RR..

Thanks Atash, I looked at the RR but I've got a lot of digging and moving of gravel to do. The RR looks great for back dragging.
 
   / Piranha toothbar on MT125 #4  
Thanks Atash, I looked at the RR but I've got a lot of digging and moving of gravel to do. The RR looks great for back dragging.

Yup the PTB is the way to go then..
 
   / Piranha toothbar on MT125 #5  
The bucket is 50 inches, and I am interested in what you find out.
 
   / Piranha toothbar on MT125 #6  
I have one. I dont remember the measurement, but I just followed the ordering instructions on the website.
It arrived in a few days.
Took me 20 minutes to install it with a 3/8 drill bit for pilot holes, followed up with the step bit for final hole size.
Now mount or dismount it in about 60 seconds with a couple crescent wrenches.
I use mine for moving gravel, sand and recently to grade and level an area for a 30 x 50 patio.
Its night and day difference vs the straight bucket blade.
 
   / Piranha toothbar on MT125 #7  
I have the PTB on my 66" bucket and it does indeed dig well.

I dug a big hole for a root cellar 7' deep, 20' wide without issue.

I also lowered the bed level in he creek in the middle of my property and that worked like a charm.

Swipe cutting saplings and brush works well too.

Like H8Monday said it's an easy install.
 
   / Piranha toothbar on MT125
  • Thread Starter
#8  
Good to know. I'm thinking 49 3/4". Hope I'm right.
 

Tractor & Equipment Auctions

2013 Toyota Prius Hatchback (A50324)
2013 Toyota Prius...
2011 Ford Transit Connect XLT (A50323)
2011 Ford Transit...
2022 Continental 16ft T/A Enclosed Trailer (A49461)
2022 Continental...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
2006 Volvo VNL (A51039)
2006 Volvo VNL...
Case Ih 1660 Combine (A50514)
Case Ih 1660...
 
Top