Pimp my Ride.....Branson edition.

[Helitech]

Off we go.....didn't take a week before starting some additions to the new 5220r Branson. Added some connections for the EA Wicked grapple that has been ordered. Didn't drill any holes in anything for this. Takes a bit of planning and fabrication, but is well worth the extra time to me.[/URL?

 

[Helitech]

Used the brackets that came with the pioneer break away mounts. Very sturdy!

 

[Helitech]

Hose routing using stand offs.

 

[Helitech]

Added a grill screen/LED l8ght mount next. Drilled and tapped the Branson brackets so I could bolt on the screen. Had to shim the stock grill guard back some, it was way too close to the loader. Here's the stock one.

 

[Helitech]

I used 2 longer bolts so that I had a place to mount a couple of Adel clamps.

 

[Helitech]

Had a tough time finding a spot for a small tool box. Finally decided to use a small ammo can and to mount it on the forward part of the left floor board. Once again I used an existing bolt location and a mirror mounting bracket so as to not drill any holes.

 

[Helitech]

 

[Helitech]

 

[Helitech]

A couple of bolts through the bracket into the box and some black paint.

 

[Helitech]

Can anyone see the pictures. They show up on my phone, but not my laptop.