PHD stand

   / PHD stand #11  
Here is how I did mine, I hook up a come-a-long to the bracket I welded to the PHD, pull the pins and jack it up in my lean-to.
To reattach it, I lower the come-a-long, put in the pens, and drive off.
It takes very little room with the auger and the frame of the PHD both vertical.
I need a lot of paint on mine,
I retired from the FAA in Oklahoma City in 1978 and moved to warmer weather.
Jim
 
   / PHD stand #12  
here is the pic
 

Attachments

  • 53-198356-phd.JPG
    53-198356-phd.JPG
    74 KB · Views: 262
   / PHD stand #13  
I like the idea of hanging the PHD and by having a strap clamp or bracket welded on it will always hang the same way.
Wally
 

Tractor & Equipment Auctions

30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2007 Ingersoll Rand 185 Air Compressor (A49461)
2007 Ingersoll...
2008 Ford F-250 Reading Service Truck (A50323)
2008 Ford F-250...
2015 FREIGHTLINER CASCADIA (A50854)
2015 FREIGHTLINER...
HUSKY 135 PSI AIR COMPRESSOR (A50854)
HUSKY 135 PSI AIR...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
 
Top