Here's a tip I learned: The outer covering of hydraulic hoses cracks due to sun exposure. Water base exterior house paint provides 100% UV protection. Not sure if oil base paint does as well, but I know water based does. When I painted my loader I painted all of the hoses, albeit with oil base. I think they will hold up just as well.
Paint your hoses
- Thread starter Laneman
- Start date
- Views: 5678
Aaron_D
Bronze Member
- Joined
- Jul 24, 2009
- Messages
- 76
- Location
- Rhode Island
- Tractor
- Bobcat CT230, Bobcat 325 Excavator, John Deere X300
I wouldnt use any airsol paints as the propellant is typically not rubber friendly. I would also worry about cracking of the paint over time at the areas which flex. Why not use hose sleeves? those will also help against abraision and is fairly inexpensive.
pat32rf
Veteran Member
Maybe I should have painted my trailer tires when I replaced them, not just the rims.....They are 5 years old and look worse for cracks than the 20yr old Goodyears that I took off!!!
Discount Hydraulic Hose
Silver Member, Advertiser
If you're going to do this, it is probably a good idea to make note of the layline on your hoses and write it down somewhere. As someone in the hose business, I get phone calls very often from people wanted us to make replacement hoses for them, and they have no idea what hoses they have on their equipment now, or what kind of pressure the replacement hoses must handle.
Here are some similar links:
